If you’re looking to start sewing and need a machine that can handle a lot of different fabrics, the Kenmore Ultra Stitch Sewing Machine is a great option. It has a wide variety of stitches, so you can sew everything from lightweight materials to more durable fabrics.
Plus, it’s easy to thread, making it perfect for beginners.
How To Thread A Kenmore Ultra Stitch 12 Sewing Machine
If you are looking to purchase a Kenmore Ultra Stitch sewing machine, then you may want to heed the following instructions. First, remove the upper cover. Next, locate the thread path on the front of the machine and turn the bobbin case to the right.
Finally, remove the screws and top cover (if applicable). After that, fit felt pad and throw away. Thread the sewing thread onto the spool by hand and align the zipper foot with the zipper track on main body of the machine. Push it in place and replace the screws.
Enjoy your new Kenmore Ultra Stitch sewing machine!
Remove Upper Cover
To remove the upper cover of your Kenmore Ultra Stitch sewing machine, follow these steps: Open the front cover by pressing down on the release button and pulling up on the top flap.
Remove the bobbin case and needle ( by gently pushing them out from behind the fabric covered lever (. Lift up on the arm ( that is attached to the bobbin case, and then remove it from the machine.
Close the front cover by pressing down on the release button and tucking in the top flap. Reattach the bobbin case to its mounting bracket and reinsert the needle into its housing (. Replace the upper cover by sliding it over onto its mounting brackets, making sure that it snaps into place.
Locatethread Path On Front Of Machine
If you are having trouble locating the thread path on your Kenmore Ultra Stitch sewing machine, follow these simple steps. Hold the fabric taut against the front of the machine and adjust the bobbin tension until you see two white lines running down from the needle area.
The thread path will intersect both lines, making it easier to find. When you have located the thread path, keep it in view as you sew by following it continuously with your eyes or by turning your fabric periodically so that the machine stitches through both layers of fabric at once.
If you ever lose sight of the thread path, simply turn your fabric so that it is perpendicular to where you last saw the thread path and start stitching again at the beginning of that line. Keep in mind that this method works best when stitching fabrics that are relatively smooth and flat-fronted such as cotton or rayon fabrics.
For more challenging fabrics such as wool or silk, try using a zigzag stitch instead of a straight stitch to help guide the needle correctly onto the fabric fibers.
When finished stitching, be sure to remove any excess threads by either pulling them through a small eyelet on top of your machine or use aThread Cutter . Be sure to carefully clean all parts of your Kenmore Ultra Stitch sewing machine after each use for maximum efficiency and long lasting performance.
Turn Bobbin Case To The Right And Remove Screws
To thread a Kenmore Ultra Stitch sewing machine, turn the bobbin case to the right and remove the screws. Now, you can lift up the bobbin case and find the spool pin. Next, locate the small screw on the front of the bobbin case that holds in the spool pin and unscrew it.
Lift up the bobbin case so that the spool and bobbin are free and put them in a safe place. Replace the small screw on top of the bobbin case and reattach it to its mounting bracket with a screwdriver. Put everything back together by replacing the screws on top of the bobbin case and mounting bracket.
Be sure to adjust your tension before starting to sew again by turning your machine’s knob located on top of your machine left or right until it is in line with other markings on your machine body (it should be set at “).
When you’re finished sewing, lower your fabric onto your work surface, pull out your threaded needle from Fabric insert it into Fabric about an inch from one end, then pull gently through both fabrics to create a knot (you can see this illustrated in most sewing books).
Hold down one end of Fabric as you do this so that fabric doesn’t drag across your work surface as you release Fabric from between needle and fabric – now repeat steps for opposite end of Fabric (Fabric becomes Fabric . Finally carefully tuck away both ends of Fabric making sure they’re not visible once finished!
Remove Top Cover (If Applicable)
If you have a Kenmore Ultra Stitch sewing machine, it is important to know how to remove the top cover so that you can use the machine’s stitches more efficiently. To remove the top cover on your Kenmore Ultra Stitch sewing machine: -Start by lifting up on one end of the cover.
Then, gently pull it off of the machine.-You may need to hold onto one side or the other if it is stubbornly attached.
Once the top cover is removed, you can see all of the machine’s parts and functions. Now that you know how to remove the top cover on your Kenmore Ultra Stitch sewing machine, be sure to use it for optimal results!
Remove Felt Pad And Throw Away
If you have a Kenmore Ultra Stitch sewing machine, it’s important to know how to remove the felt pad and throw away the old thread before starting a new project. The felt pad is located on top of the bobbin case and needs to be removed in order to start a new project.
To remove the felt pad, push down on one end and pull it off. Then, use a screwdriver or another tool to pry off the casing around the bobbin. Once the casing is removed, take out the old thread and throw it away in a designated area.
After removing the felt pad and throwing away the old thread, it’s time to install the new thread for your new project! Thread your needle by following these steps: insert it into hole at top of bobbin case; lift up bobbin cover; put threads over spindle (if applicable); replace cover and tighten screws.
Now that you know how to remove and replace the felt pad on your Kenmore Ultra Stitch sewing machine, get started on your next project!
Thread The Sewing Thread Onto The Spool By Hand
To thread the sewing thread onto the spool by hand, start by unwinding the appropriate amount of thread from the spool. Hold the end of the thread in your left hand and use your right hand to hold onto the bobbin.
Thread one side of the thread over the top of the bobbin, then pull it tight so that it’s snug against the bobbin. Thread the other side of the thread over the top of the bobbin, then pull it tight so that it’s snug against the first side.
Make sure both threads are tightly secured against each other and spin on the spindle to tighten up your stitches. If you need to make a small adjustment to your stitches, simply loosen one side of either stitch and re-secure with a new knot.
When you’re finished stitching, cut off any excess threads with scissors or a fingernail clipper and store away for future projects!
Align The Zipper Foot With The Zipper Track On The Main Body Of Machine And Push It In Place
Align the zipper foot with the zipper track on the main body of your machine and push it in place. You can also use one hand to hold onto the upper edge of the fabric and guide the other hand as you sew.
With this technique, you will minimize skipped stitches and improve seam accuracy. If you have a Kenmore Ultra Stitch sewing machine, be sure to try this method for improved results!
Fit Lower Cover And Replace Screws
If your lower cover has lost its fit and screws, follow these simple steps to replace them: Open the cover on your Kenmore Ultra Stitch sewing machine and remove the two screws at the top of the arm.
Insert a screwdriver into one of the holes on each side of the arm and turn it until it comes out. Repeat this step for the other hole, then replace both screws. Gently close the cover by pushing down on both sides until it snaps into place.
Reattach the upper cover by aligning it with the marks on the arm and pressing down until it clicks in place. Replace any missing feet if needed, then test your new lower cover by stitching a piece of fabric to see if it fits properly.
If you’re new to sewing, the Kenmore Ultra Stitch Sewing Machine is a great starter machine. It has easy-to-use controls and features an automatic needle threader and stop.
Additionally, it’s lightweight and portable, making it perfect for small spaces or travel. Overall, the Kenmore Ultra Stitch Sewing Machine is a great option for anyone looking to start sewing!